18 electronics jobs found

Responsibilities: With your expertise and ideas, you will ensure that our new, high-quality products meet our customers’ requirements. Specifically, you will be responsible for: Architecture design of High Voltage Power Supplies e.g. wavetube based radar applications System engineering Detailed circuit design including simulations, analysis and breadboarding Guidelines for PCB-Layout, 3D mechanical layout and potting approach Definition of commissioning- and test-procedures Commissioning and test of initial units Requirements: Successfully completed bachelor’s or master’s degree in electronics Sound knowledge of High Voltage DC/DC converters Professional experience in power electronics and circuit technology Good knowledge in English (written and spoken) is mandatory

Responsibilities: With your expertise and ideas, you will ensure that our new, high-quality products fulfil our customers’ requirements. Specifically, you will be responsible for Architecture design of innovative, digitally controlled power supplies according to customer requirements Detailed circuit design of the defined architecture Detailed design of control algorithms Validation of the detailed design through simulation, analysis and breadboarding Monitoring of the PCB layout Definition of commissioning and test procedures Definition and design of the test setup Commissioning and testing of the first devices Requirements: Successfully completed Bachelor’s or Master’s degree in electronics Sound knowledge of DC/DC converters Professional experience in power electronics and circuit technology Good written and spoken German and English skills

Tasks: With your expertise in space projects, your innovative ideas, and your drive, you ensure that our new high-quality products meet the demands of our customers. As a project manager, you are responsible for all technical, commercial, and programmatic aspects of your project. Your tasks and responsibilities include in particular: Your tasks will include the following in particular: Leading customer projects as well as internal development projects for the development, qualification, and/or production of power electronics for space applications based on PMI/PMBOK project management methods Project responsibility for the entire project in terms of time, scope, cost, and quality Implementation of the required Q-gate including appropriate documentation to ensure proper project tracking Coordination and monitoring of subcontractor work packages and project orders through the procurement department. Coordination of the resources needed for the project Project...

Open Call: Newly graduated Electronics Engineer We are looking for a newly graduated Electronics Engineer for a challenging opportunity in a dynamic environment at ALMA SISTEMI - ENGINEERING FOR SPACE. If you are passionate about electronic design and wish to prove yourself in practical development, testing and prototyping activities, this is the opportunity for you!

On behalf of the European Space Agency, we are looking for a highly skilled  Design Support Engineer  to work in ESTEC, in the Netherlands. Where: You will be working within ESTEC, the European Space Agency’s offices in the Netherlands as a contractor for Telespazio Belgium. We don’t expect the employees to be on-site full time however you will still have to relocate to the Netherlands for this position. Check out the ESTEC site here:  esa.int/About_Us/ESTEC When Deadline to apply: coming soon!

On behalf of the European Space Agency, we will be soon looking for 2 highly skilled  Automation & Robotics Engineers   to work in ESTEC, in the Netherlands. Where: You will be working within ESTEC, the European Space Agency’s offices in the Netherlands as a contractor for Telespazio Belgium. We don’t expect the employees to be on-site full time however you will still have to relocate to the Netherlands for this position. Check out the ESTEC site here:  esa.int/About_Us/ESTEC When: Deadline to apply: 18/06/2025

On behalf of the European Space Agency, we will be soon looking for a highly skilled  T ime and Frequency generation and distribution Engineer  to work in ESTEC, in the Netherlands. Join ESA’s RF Equipment and Technologies Section at ESTEC to lead the development and validation of cutting-edge time and frequency systems for space applications. Where: You will be working within ESTEC, the European Space Agency’s offices in the Netherlands as a contractor for Telespazio Belgium. We don’t expect the employees to be on-site full time however you will still have to relocate to the Netherlands for this position. Check out the ESTEC site here:  esa.int/About_Us/ESTEC When: Deadline to apply: ASAP  

Developing requirements and conduct requirement validation of optical payloads based on analysis and testing Provide optical engineering expertise to support manufacturing tasks and issues Working across multiple engineering disciplines Development and design of satellite systems and subsystems Support with the proposal’s preparation and evaluation Participation in technical reviews with our international partners such as the European Space Agency Active participation in the procurement, assembly, and test processes Build effective relationships across organizations, disciplines (electrical, mechanical, ther-mal, software) and with customers Presentation of work results internally and to the customer Actively participate in the expansion of the company's know-how (knowledge sharing, mentoring, training)

As an Electrical Engineer you will work closely with our Engineering departments on developing the spacecraft/satellite electrical subsystem as well as supporting business development during proposal preparation.

We are currently seeking a highly skilled and motivated  System Engineer   to join our team, focusing on projects in the  Low Earth Orbit (LEO)  sector, who will work for Telespazio Belgium in the Netherlands. When: Starting date: May 2025 Where: You will be working within our Telespazio Belgium office in Katwijk Aan Zee, the Netherlands. Please note that interviews will be held either via Teams, Skype, Webex, or other digital platforms or in person. We look forward to receiving your application for this position!

As part of our RF team, you will work on the development of innovative communication techniques for space-to-ground communications . Here's a breakdown of the tasks you could be involved in: Simulation : Contribute to the development of a software simulator to recreate a typical low-earth orbit satellite scenario. It will include simulation of propagation effects, RF front-ends, space and ground antennas and their effects on a transmitted RF signal. Software Defined Radio : develop software modules for signal demodulation such as PLL/DLL, time-synchronisation, Phase/Frequency compensation. Custom Signal Processing : Implement custom signal processing algorithms to analyze and enhance the signal received on-ground by several antennas, employing combination techniques and beamforming theory. System evaluation : Benchmark the identified solutions by evaluating the benefit and complexity of each technique also with respect to hardware implications. Test-bed Solutions :...

We are on the lookout for an experienced embedded developer with strong C++ skills to join our team. The ideal candidate will have 3-5 years of relevant experience and will be a lab animal - not afraid to fiddle with hardware and prototype the firmware for it. Your role will be to conduct the development and prototyping of avionic systems for space products and related ground equipment, focusing on the software/firmware aspects. This role puts you in close collaboration with the Head of Embedded Systems, offering a unique perspective into the workings of a fast-growing startup. It's a chance to play a crucial part in our team, where your contributions will directly shape the space systems we develop.

As System AIT (SAIT) Engineer at ISISPACE, you will be responsible for the system level integration and test activities within our satellite projects. The SAIT team is a dynamic team where last-minute work is not rare and problems need to be solved on the spot, while maintaining a high-quality standard. As a SAIT team member, you will contribute to the continuous improvement of the System AIT phase by proposing and introducing changes to streamline the process.  You will be assigned to perform the definition, organization, coordination and execution of associated functional and environmental test campaigns. To do so you will interface closely with Systems Engineers, Design Engineers, Test Operators and the PA/QA team. Great organizational skills and solid theoretical as well as practical knowledge of electronics are required. Experience with mechanical engineering and environmental test standards (e.g. ECSS, MIL-STD) will be considered an asset. Moreover, a proactive attitude and...

We are looking for a talented Lead System engineer taking leadership on the technical aspects of our Earth Observation optical products.

Introduction We are seeking a talented and motivated Marketing Intern to join our growing team. You will work directly with the CCO and technical team to develop compelling marketing materials that showcase our groundbreaking space technology, while gaining valuable experience in high-tech marketing and communications.   About the role You will play a crucial role in developing and maintaining SPHERICAL's corporate brand and marketing presence. Working closely with technical experts and receiving mentorship from seasoned professionals, you'll help communicate our mission and achievements to key stakeholders. This internship is designed to equip you with the skills and knowledge to thrive in any fast-paced, hi-tech work environment.

The Flight Systems Division develops space systems for the International Space Station, DreamChaser and Deep Space Gateway. The work is multi-disciplinary, involving hardware, software and electronics. On average each year one of our systems will be launched to Low Earth Orbit or Lunar Orbit. The Division develops according to audited EN9100 processes and supports post-delivery/on-orbit operations.   Position We are looking for a Project Manager to take responsibility for the development of Space Flight Equipment. The projects are usually inter-agency, and customers include the European Space Agency (ESA), the National Aeronautic and Space Administration (NASA), and the European Commission. The Project Manager should have a strong knowledge of design and development of avionics equipment, and/or robotic or space mechanisms systems for use in space (LEO as well as deep space – in particular Lunar orbit and Lunar surface). The position is in the...

Wanna join the adventure? Are you passionate about the thermal design, architecture, and analysis of spacecraft? Would you like to work on a team that is involved in all phases of development, from business proposals to design, AIT, and spacecraft commissioning? Do you want to work in a fast-paced, dynamic and multicultural environment in a small size company? Are you interested in widening your scope of competencies by being part of a system analysis team? If so, this is the perfect role for you! Loft flies multiple satellites per year, is a growing company, and is looking for a thermal engineer to join the Mission Analysis and Engineering team.   About this Role: Thermal architecture of small spacecraft’s payload accommodations modules Thermal modeling and analysis of spacecraft and payloads Work closely with design engineers to implement thermal designs Design and execute thermal test plans for spacecraft and sub-system/component level...

The company is selecting one engineer to be integrated in the GNC/AOCS Competence Centre of the Flight Systems Business Unit, to support new growth areas in Guidance, Navigation, and Control (GNC), including Attitude and Orbit Control Systems (AOCS) and Failure Detection, Isolation, and Recovery (FDIR). The work of the GNC/AOCS Competence Centre is oriented to the design, development, specification, and validation of autonomous systems for a broad range of aerospace and aeronautical platforms. As a matter of reference, the activities covered are: −Satellite formation flying, rendezvous, in-orbit servicing (IOS) and active debris removal (ADR) −Entry, descent, and landing on planets (Earth, Mars) & natural satellites −Launch vehicles −Earth observation, up-stream (flight segment) and downstream −Interplanetary exploration and navigation −Unmanned autonomous vehicles (UAVs, UGVs) −System and mission design